Gigabyte GA-X99-SOC Force (rev. 1.0) F3

SPONSORED LINKS

    Specification

  • Version: F3
  • File size: 7.9 KB
  • File name: mb_bios_ga-x99-soc-force_f3.zip
  • Last update:
  • Platform: OS Independent
  • Price:Free
  • Company: GigaByte

Gigabyte GA-X99-SOC Force (rev. 1.0) F3 driver description:




Publisher review:
Specifications:

CPU:
- Support for Intel Core i7 processors in the LGA2011-3 package
- L3 cache varies with CPU

Chipset:
- Intel X99 Express Chipset

Memory:
- 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
- 4 channel memory architecture
- Support for DDR4 2133/1866/1600/1333 MHz memory modules
- Support for non-ECC memory modules
- Support for Extreme Memory Profile (XMP) memory modules
- Support for RDIMM 1Rx8 memory modules (operates in non-ECC mode)

Audio:
- Realtek ALC1150 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF Out

LAN:
- Intel GbE LAN chip (10/100/1000 Mbit)

Expansion Slots:
- 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
- 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
- 3 x PCI Express x1 slots

Multi-Graphics Technology:
- Support for 4-Way/3-Way/2-Way AMD CrossFire/NVIDIA SLI technology

Storage Interface:
- 1 x M.2 Socket 3 connector (M2_20G)
- 1 x SATA Express connector
- 6 x SATA 6Gb/s connectors (SATA3 0~5)
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
- 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only

USB:
- 2 x USB 3.0/2.0 ports available through the internal USB header
- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
- Chipset + 2 Renesas uPD720210 USB 3.0 Hubs:
- 8 x USB 3.0/2.0 ports on the back panel

Internal I/O Connectors:
- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 1 x OC PEG Power Connector
- 1 x SATA Express connector
- 1 x M.2 Socket 3 connector
- 10 x SATA 6Gb/s connectors
- 1 x CPU fan header
- 1 x water cooling fan header (CPU_OPT)
- 3 x system fan headers
- 1 x heatsink LED power connector
- 1 x Thunderbolt add-in card connector
- 1 x OC Panel connector (for future expansion)
- 1 x front panel header
- 1 x front panel audio header
- 1 x S/PDIF Out header
- 1 x USB 3.0/2.0 header
- 2 x USB 2.0/1.1 headers
- 1 x serial port header
- 1 x Clear CMOS jumper
- 1 x power button
- 1 x reset button
- 1 x Clear CMOS button
- 1 x Gear button
- 1 x OC Tag button
- 1 x OC Trigger switch
- 1 x CPU BCLK Down button
- 1 x CPU BCLK Up button
- 1 x CPU Ratio Down button
- 1 x CPU Ratio Up button
- 1 x Settings Lock button
- 1 x Direct to BIOS button
- 1 x OC PCIe switch
- 1 x OC Ignition button
- 1 x Clear Battery button
- 1 x DualBIOS switch
- 1 x onboard voltage measurement module
- Temp sensor ports

Back Panel Connectors:
- 4 x USB 2.0/1.1 ports
- 1 x PS/2 keyboard/mouse port
- 1 x CPU overclocking button
- 1 x BIOS switch button
- 1 x Clear CMOS button
- 8 x USB 3.0/2.0 ports
- 1 x RJ-45 port
- 1 x optical S/PDIF Out connector
- 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)

I/O Controller:
- iTE I/O Controller Chip

H/W Monitoring:
- System voltage detection
- CPU/System/Chipset temperature detection
- CPU/CPU OPT/System fan speed detection
- CPU/System/Chipset overheating warning
- CPU/CPU OPT/System fan fail warning
- CPU/CPU OPT/System fan speed control

Form Factor:
- E-ATX Form Factor: 30.5cm x 26.4cm



Do not forget to set a system restore point before installing Gigabyte GA-X99-SOC Force (rev. 1.0) F3 driver, to avoid problems that may occurs when you install a wrong driver, or for other OS version etc. If a problem occur than you may restore you computer to previous time, before installing the driver.

Operating system:
OS Independent

SPREAD THE WORD

User Rating


Rating: 3.5 out of 5
Based on 8 ratings. 8 user reviews.

  • Currently 3.50 out of 5
  • 1
  • 2
  • 3
  • 4
  • 5